RATINGS*
Input
power (max.) - 160 hp (119 kW)
Input no load speed (max.) - 3000 rpm
Turbine stall torque (max.) - 900 lb/ft (1200 Nm)
ROTATION
Converter
Input - Counterclockwise
9.63 in. (244.6 mm) drop output - Counterclockwise (forward spool position
- spool out)
All rotations viewed from opposite input side (looking at flywheel)
MOUNTING
Engine
(E) - SAE
#3 dry converter housing with flex plate converter drive
Side mounting pads - recommend engine/transmission cradle mounting
Midship (M) - Rear mounting pads and input bail (engine mounted
torsional damper required) (Dim. Page
3)
Remote (R)-Rear mounting pads (engine mounted torque converter PTO
with charge pump required) (Dim. Page
3)
CONVERTER
Three
element, single stage, with free wheel stator or fixed stator
Sizes: 11.75
in. (298.5 mm) STR 2.01 thru 2.90
12.75 in.
(323.9 mm) STR 2.10 thru 2.70
(STR-Stall Torque Ratio)
GEARING
Constant mesh, in line, high quality spur gears
Forward and Reverse ratios equal
1000
SERIES POWERSHIFT
| |
|
|
|
|
Ratios |
|
|
|
|
| Drop |
Version |
|
Forward |
|
|
|
Reverse |
|
|
in.
(mm) |
|
1ST |
2ND |
3RD |
4TH |
1ST |
2ND |
3RD |
4TH |
9.63
(244.6) |
3/3 |
4.46 |
2.35 |
.805 |
|
4.46 |
2.35 |
.805 |
|
|
3/3 |
5.12 |
2.70 |
.923 |
|
5.12 |
2.70 |
.923 |
|
|
4/4 |
5.12 |
2.70 |
1.47 |
.791 |
5.12 |
2.70 |
1.47 |
.791 |
18.63
(473.2) |
3/3 |
4.46 |
2.35 |
.805 |
|
4.46 |
2.35 |
.805 |
|
|
4/4 |
5.12 |
2.70 |
1.47 |
.791 |
5.12 |
2.70 |
1.47 |
.791 |
|
CLUTCHES
Fully modulated, oil cooled, multidisc, hydraulic actuated, self-adjusting
PUMP DRIVE
|
PUMP
DRIVE PADS LEFT AND RIGHT SIDE |
|
LEFT SIDE |
RIGHT SIDE |
| Rotation (viewing
drive pad) |
counterclockwise |
counterclockwise |
| Ratio (engine speed to
pump speed |
1:1 |
1.15:1 |
| Mounting and spline
size |
SAE A, B, or C |
SAE A, B, or C |
| Disconnect available
for mounting size |
SAE C |
SAE C and B |
| Power ( max.
intermittent) |
160 hp (119 kW) |
160 hp (119 kW) |
CONTROLS
Standard
valve body with full clutch modulation mounted on transmission
Standard functions-directional spool, speed spool, neutral start switch
APPROXIMATE WEIGHT
- Reverse
warning alarm switch
- Inching valve
- Brake cutoff
- Disk parking
brake
OIL
Hydraulic transmission fluid type C-4 (MIL-L-2104 Grade 10)
latest revision
Funk filter remote mounted
WEIGHT
Approximate dry
weight: 750 lbs. (340 kg)
*Subject to selection of
torque converter and gear ratios.
Note: All data and specifications subject to change without notice or
obligation.
|
