SERIES

 

1700       
         

                                                                                                                
RATINGS*                                
Input power (max.) - 125 hp (93 kW)
Input no load speed (max.) - 3000 rpm
Turbine stall torque (max.) - 690 lb/ft (936 Nm)

ROTATION
Converter Input - Counterclockwise
Output - Counterclockwise
(forward spool position - spool in)
All rotations viewed from opposite input side (looking at flywheel)

MOUNTING
Engine (E) -
SAE #3  dry converter housing with flex plate converter drive
Side mounting pads - recommended engine/transmission cradle mounting
Midship (M) - Side mounting pads and input bail (engine mounted torsional damper required) (Dim. Page 3)
Remote (R)-Two side mounting pads (engine mounted torque converter PTO with charge pump required) (Dim. Page 3)

CONVERTER
Three element, single stage, with free wheel stator or fixed stator
Sizes: 11.75 in. (298.5 mm) STR 2.01 thru 2.90
           12.75 in. (323.9 mm) STR 2.10 thru 2.70

(STR-Stall Torque Ratio)

GEARING
Constant mesh, in line, high quality spur gears
Forward and Reverse ratios equal

CLUTCHES
Fully modulated, oil cooled, multidisc, hydraulic actuated, self-adjusting


PUMP DRIVE

PUMP DRIVE PADS LEFT AND RIGHT SIDE

LEFT SIDE RIGHT SIDE
Rotation (viewing drive pad) counterclockwise counterclockwise
Ratio (engine speed to pump speed 1:1 1.15:1
Mounting and spline size SAE A, B, or C SAE A, B, or C
Disconnect available for mounting size SAE C SAE C and B
Power ( max. intermittent) 125 hp (3 kW) 125 hp (3 kW)

CONTROLS
Standard valve body with full clutch modulation mounted on transmission
Standard functions-directional spool, speed spool, neutral start switch

OPTIONS

  • Axel disconnect
  • No-spinoff differential
  • Ground drive pump pad
  • Electric control valve
  • Reverse warning alarm switch
  • Inching valve
  • Brake cutoff
  • Disk parking brake

OIL
Hydraulic transmission fluid type C-4 (MIL-L-2104 Grade 10)
latest revision
Funk filter remote mounted

WEIGHT
Approximate dry weight: 750 lbs. (340 kg)

*Subject to selection of torque converter and gear ratios.
Note: All data and specifications subject to change without notice or obligation.


1700 SERIES POWERSHIFT

          Ratios        
Drop Version Forward Reverse
in.
(mm)
1ST 2ND 3RD 4TH 1ST 2ND 3RD 4TH
18.63
(473.2)
3/3 4.46 2.35 .805 4.46 2.35 .805
3/3 5.12 2.70 .923 5.12 2.70 .923
4/4 5.12 2.70 1.47 .791 5.12 2.70 1.47 .791