RATINGS*
Input
power (max.) - 225 hp (168 kW)
Input no load speed (max.) - 3000 rpm
Turbine stall torque (max.) - 1200 lb/ft (1627 Nm)
ROTATION
Converter
Input - Counterclockwise
Output - Counterclockwise
All rotations viewed from opposite input side (looking at flywheel)
MOUNTING
SAE
#3 dry converter housing with flex plate converter drive
Direct engine mounting
Assembly may be rotated so pump drives are on top (180º from
illustration)
CONVERTER
Three
element, single stage, with free wheel stator or fixed stator
Sizes: 11.75
in. (298.5 mm) STR 2.01 thru 2.90
12.75 in.
(323.9 mm) STR 2.10 thru 2.70
(STR-Stall
Torque Ratio)
PUMP DRIVE
|
PUMP DRIVE PADS
LEFT AND RIGHT SIDE |
|
LEFT SIDE |
RIGHT SIDE |
| Rotation (viewing
drive pad) |
counterclockwise |
counterclockwise |
| Ratio (engine speed to
pump speed |
1.15:1 |
1:1 |
| Mounting and spline
size |
SAE A, B, or C |
SAE A, B, or C |
| Disconnect available
for mounting size |
SAE C |
SAE C and B |
| Power ( max.
intermittent) |
225 hp (168 kW) |
225 hp (168 kW) |
|
CHARGE
PUMP
Externally mounted for easy service
Filtration and external valving required
Charge pressure (max.) - 180 to 260
(depending on transmission used)
Flow at 2500 rpm -23 gpm (87 L/min.)
-15 gpm (57 L/min.)
(depending on transmission used)
ACCESSORIES
Temperature
sender
OIL
Hydraulic transmission fluid type C-4 (MIL-L-2104 Grade 10)
latest revision
Funk filter remote mounted
WEIGHT
Approximate dry
weight: 260 lbs. (118 kg)
*Subject to selection of
torque converter and gear ratios.
Note: All data and specifications subject to change without notice or
obligation.
|
