|
CIA Machinery, Inc. |
Blade Series Teeth and Pockets
| Part No. | Code No. | Description | ||
16844 |
TRT-1 | 3/16" THK. full face rock blade. Tooth cuts 3/8" gauge for pocket. | ||
| Application: | ||||
| Can be used in all pockets non-fracturable material, frozen
soil, abrasive material. Medium to hard rock. Recommended rotation speed 20 to 25 rpm.
|
||||
| Part No. | Code No. | Description | ||
| 510184 | TWT-2 | 3/16" THK. full face gauge rock blade. Tooth cuts 3/4" gauge for pocket. | ||
Application: |
||||
| Can be used in all pockets non-fracturable material, frozen
soil, abrasive material. Medium to hard rock. Recommended rotation speed 20 to 25 rpm.
|
||||
| Part No. | Code No. | Description | ||
| 29321 | TK-55-C | Four tip conical carbide rock cutter. 3/8" THK. conicals brazed and then entire cutter is heat treated for strength and durability. | ||
| Application: | ||||
| Can be used in all pockets fractured and non-fracturaable
material. Angle of attack & conical tips increase penetration rates in most augerable
materials. Hard to very hard rock. Recommended rotation speed 25 to 35 rpm.
|
||||
| Part No. | Code No. | Description | ||
| 17318 | TDB-31 | Heat treated dirt blade, with a 45 degree attack angle | ||
| Application: | ||||
| Can be used in all pockets, soft earth digging, and clay
materials. Recommended rotation speed 40 rpm.
|
||||
| Part No. | Code No. | Description | ||
| 69322 | TAP-3 | AISTM-148 cast steel tooth pocket. Tapered slot to reduce tooth chatter. | ||
| Application: | ||||
| Accepts: TRT-1, TWT-2, TK-55-C, TDB-31 auger teeth.
|
||||
