Products









Español

CIA Machinery, Inc.
P.O. Box 763670
Dallas, TX 75376
Toll Free 877-527-6406
Fax 972-224-8204



Reedrill Texoma Model 650
Technical Data

Standard Equipment

Drill Depth:                    
40’ (12.2 m)

Engine:                         
Diesel engine; 152 H.P.

Drive System:                
Hydrostatic Drive with variable speed piston pump & motor.  Closed loop system.

Kelly Bar:                      
2 bar telescopic system with 5” (127 mm) square outer x 3-1/2” (88.9 mm) solid Inner  with 4” (101.6 mm) stub

Standard Mounting

Chassis:                  
120” (3,048.0 mm) CA tandem axle chassis; GVWR 48,000 lbs. (21,772.4 kg) minimum

Crawler:                   
Excavator type crawler assembly (Reedrill supplied), continuous rotation hydraulic swivel, 24” (609 mm) wide – 3 bar.  Crawler width: 8’6” (2.62 m); length: 13’ (3.97 m)

Turntable Base

     Chassis:                  
240° rotation on geared bearing with Planetary swing motor

     Crawler:                  
360° rotation on geared bearing with Planetary swing motor      

Frame Travel:

     Chassis:                 
 
24” (609.6 mm) fore and aft travel

     Crawler:                   
42” (1066.6 mm) fore and aft travel

Outriggers (Chassis):       

Front – Hydraulic Out and down; Rear – Hydraulic straight down on corners (enclosed cylinders)

Fuel Tank:                     
60 gallon (227.4 l)

Hydraulic Reservoir:            
110 gallon (416.9 1) capacity with suction strainer and return filter

Inner Kelly Winch:            
Planetary - 18,000# (8,172 kg) rated capacity

Service Winch:              
Planetary - 8,000# (3,632 kg) rated capacity 

Operator’s Station:            
Operator’s console with full instrumentation, enclosed instrument panel, Joy stick control, Pilot operated valves, 4 way adjustable operator’s seat with arm rest, access steps, grab handles

Accessories:                 
Tool box, drop pocket, boom rest, clearance lights, reflectors, mud flaps

Paint:                           
Texoma “yellow” with black base or customer’s colors using standard automotive enamel

Manuals:                      
Two (2) sets – Owner/Operator, Parts and Service manuals

Optional Equipment

Drill Depth:    

 50’ (15.25’)           

Installation:     Factory mounted on customer supplied chassis  

Paint:          Imron paint in lieu of enamel                  

  Chassis Requirements: (Customer Supplied)                    

48,000 lbs. (21,772.4 kg) GVWR minimum with 120” (3,048.0 mm) CA tandem axle; Frame height 40” (1,106 mm)

 

Note: Air brakes on chassis over 28,000 lbs. GVWR (12,712 kg).  Thru chassis frame required; applicable all models.

Chassis should include 2,000 lbs. (909 kg) spring over axle rating.  H.D. electrical, power steering, increased capacity cooling, diesel-electric operated fuel shut-off.

   

Basic Specifications

      US            

   Metric

Basic Specifications

       US

    Metric

Drill Torque:

43,404 ft-lbs.

 59,029 nm

Rotary Clearance:

 

 

Capacity/Hole
 Diameter

60” maximum

  1,524 mm

                  Chassis

82”

 2,082.8 mm

Crowd (Rated Capacity)                  

24,500 lbs.

11,123 kg

                  Crawler

61”

 1,549.4 mm

Hoist (Rated Capacity)                  

18,000 lbs.

  8,172 kg

                 

 

 

Hole diameter capacity may vary depending on soil conditions and Rotary clearance is from bottom of kelly to ground in operating (mast up) position and varies with chassis frame height

 

 DIMENSIONS:

                                                              TRUCK CHASSIS MOUNTED

Basic
 Specifications

      US           

  Metric

Basic Specifications

       US

   Metric

40’ Drill Depth

 

 

50’ Drill Depth

 

 

Mast Up               Height

38’5”

 11.74 m

Mast Up             Height

43’5”

13.27 m

Mast Down           Height

12’10”

   3.69 m

Mast Down         Height

13’2”

  4.03 m

Length

31’8”

   9.70 m

Length

36’8”

11.22 m

Width

8’6”

   2.62 m

Width

8’6”

  2.62 m

Approx. weight (unit only)

28,000 lbs.

12,712 kg

Approx. weight (unit only)

30,000 lbs.

13,620 kg

Truck/Chassis mounted dimensions based on 40” frame height truck

 

                                                               CRAWLER MOUNTED

Basic Specifications

      US           

  Metric

Basic Specifications

       US

    Metric

40’ Drill Depth

 

 

50’ Drill Depth

 

 

Mast Up               Height

37’5”

11.44 m

Mast Up             Height

42’5”

 12.96 m

Mast Down           Height

11’10”

  3.39 m 

Mast Down         Height

12’2”

   3.72 m

Length

31’8”

  9.70 m

Length

36’8”

 11.22 m

Width

  8’6”

  2.62 m

Width

8’6”

   2.62 m

Crawler mounted dimensions based on 36” to top of crawlers

 

This information is a general description only, is not guaranteed and contains no warranties of any kind.

 

CIA Machinery, Inc.
steves@ciamachinery.com
Toll Free 877-527-6406
Fax 972-224-8204

English ||| Español

Home ||| Products ||| Service ||| On-line Quote
Credit Application ||| Staff ||| About Us ||| Contact us

Copyright @ CIA Machinery, Inc. All Right Reserved.

Web Design by WebOutsourcing.com